Kit FeatherWing matrix of LED 8 x 16 - white
Customers who bought this product also bought:
- NeoPixel FeatherWing - 4 x 8 RGB LEDS for cards Feather
- Adafruit Feather 32U4 Fona
- Kit of 40 wires Male-Male gross customizable 150 mm Premium dupont
- Pi Zero W Starter Kit
- Dust sensor - Grove
- Female stackable connectors 12 and 16 pins for Feather
- Adafruit INA219 FeatherWing
- VCNL4010 light and proximity sensor
- HC-SR04 ultrasound distance sensor
With this kit, you'll see as it is easy to make a 8 X 16 for your Feather card LED matrix display. This kit is composed of two matrices of 8 x 8 LED color blancje and a driver in FeatherWIng format card. Each matrix is a dimension of 0.8 "side (about 2cm square) in doubling them it's altogether 128 LED to achieve your display.
This kit is has a dual matrix achicheur of 8 x 16 LED white color.
Normally, the wiring of a 8 x 16 LED matrix is expected to require 24 GPIO, which is huge. Heuresemnt the LED drivers on the map FeatherWing allows multiplex pines, with the HT16K33 controller that works in I2C with only 2 pins needed. It is easy to use thanks to a mobile Bookstore on all Feather maps.
This FeatherWing is also ideal for small animations or text scrolling.
The kit is composed of:
- 1 X Feather wing assembled and tested
- 2 X 8 x 8 white LED matrix high brightness
- 2 X 16 conecteur pines buck
A bit of welding is necessary to weld the matrices and the connectors, but this is quite simple (less than 15 minutes)
- The map uses the address 12 c 7-bit between 0 x 70 - 0 x 77, selectable by jumper
- FeatherWing card size: 51mm x 23mm x 5mm / 2.0 "x 0.9" x 0.2 "
- FeatherWing card weight: 6.3 g
- A LED matrix dimensions: 20mm x 20mm x 6mm / 0.8 "x 0.8" x 0.2 "
- Height of a matrix of LEDS without the pines: 13mm / 0.5 "
- Weight a matrix of LED: 3g
A small card compatible Arduino dedicated to IoT with its Wifi connectivity.20,40 € Add to cart
A small card compatible Arduino dedicated to IoT with its Bluetooth connectivity THE35,94 € Add to cart
A small card compatible Arduino M0 dedicated to IoT with its Wifi ATSAMD21 connectivity.41,94 € Add to cart