ADT7410 High Accuracy I2C Temperature Sensor Breakout Board
Customers who bought this product also bought:
- USB C Breakout Board - Downstream Connection
- Female stackable connectors 12 and 16 pins for Feather
- Short female connectors 12 and 16 pins for Feather
- Connectors short male 12 and 16 pins for Feather
- 5 X LED Sequins - Ruby Red - Adafruit
- Connector Strip Arduino Pack
- FeatherWing power relay - add-on for Feather card
- Colored Break-away 0.1" 40-pin strip male header (10 pieces)
- Dust collector PM2.5 DSM501A
Analog Devices, known for its reliable and well documented sensors, has a high-precision, high-resolution temperature sensor on the market, and we have made a map to make it easy to use! The Analog Devices ADT7410 goes straight to the point - it is an I2C temperature sensor, with a temperature resolution of 16 bits 0.0078°C and a temperature tolerance of 0.5°C. Connect it to your microcontroller or computer for easy and reliable temperature readings.
The ADT7410 has 2 address pins, so you can have up to 4 sensors on an I2C bus. There are also critical temperature interruption and alert pins. The sensor is good from 2.7V to 5.5V power supply and logic, for easy integration.
We have Arduino (C/C++) and CircuitPython (Python 3) libraries available for you to use with any microcontroller such as Arduino, ESP8266, Metro, etc. or with Raspberry Pi or other Linux computers through Blinka.
Each order comes with a fully tested and assembled board and a solder connector. You will be operational in less than 5 minutes!
Wide input voltage range: 2.7 V to 5.5 V
Up to 16 bits of temperature resolution (0.0078°C by lsb), default 13 bits (0.0625°C by lsb).
Very precise temperature tolerances:
±0.5°C from -40°C to +105°C (2.7 V to 3.6 V)
±0.4°C from -40°C to +105°C (3.0 V)
The configurable I2C address allows up to four sensors on the I2C bus
Works on I2C, so only two shared lines are needed
Product dimensions: 23.3 mm x 16.5 mm x 3.2 mm / 0.9 in x 0.6 in x 0.1 in
Product weight : 1.4g / 0.0oz
The TMP36 allows to measure a temperature simply with a Arduino2,50 € Add to cart
An analog amplifier for the K-type thermocouple to AD8495 database.14,34 € Add to cart
A high precision temperature I2C sensor.5,94 € Add to cart
A digital and waterproof connection One Wire temperature sensor.11,94 € Add to cart
A compatible amplifier/converter of thermocouples type K, J, N, R, S, T, E, or B.21,00 € Add to cart
An amplifier at base of MAX31865 ideall for RTD PT100 temperature sensors.17,94 € Add to cart
An amplifier at base of MAX31865 ideall for RTD PT1000 temperature sensors.17,94 € Add to cart