Monochrome 128x32 I2C OLED graphic display

Monochrome 128x32 I2C OLED graphic display

Monochrome 128x32 I2C OLED graphic display

ADA 931

data-lang="en">

A monochrome OLED display with a resolution of 128X32 pixels

Guarantee of quality This product is an official product of the brand Adafruit

Availability: Out of stock, available soon.

Need larger quantities? Contact us.

21,00 € tax incl.

Available soon.


Customers who bought this product also bought:

More info

These displays are small, only about 1" diagonal, but very readable due to the high contrast of an OLED display. This display is composed of 128x32 individual white OLED pixels, each one being turned on or off by the controller chip. Since the display produces its own light, no backlighting is required. This reduces the power required to operate the OLED and that's why the screen is so contrasting; we really like this miniature screen for its sharpness!

The SSD1306 driver chip, communicates only via I2C. 3 pins are required to communicate with the chip on the OLED display, two of which are I2C clock/data pins.

The OLED and the pilot require a 3.3 V power supply and 3.3 V logic levels for communication. To make it easier for our customers to use, we have added a 3.3 V regulator and an on-board level adapter! This makes it compatible with any 5V microcontroller, such as the Arduino.

The power requirements depend somewhat on the amount of power on the display, but on average, the display consumes about 20 mA from the 3.3 V power supply. The OLED pilot integrates a simple charging pump that transforms 3.3v-5v into a high voltage drive for OLEDs.

Of course, we wouldn't leave you with a data sheet and "good luck": We have a detailed tutorial and sample code in the form of an Arduino library for text and graphics. You will need a microcontroller with more than 512 bytes of RAM because the screen must be buffered.

You can download our SSD1306 OLED display library Arduino from github which contains a sample code. The library can print text, bitmaps, pixels, rectangles, circles and lines. It uses 512 bytes of RAM since it needs to buffer all the display but it's very fast! The code is easy to adapt to any other microcontroller.

Feature

These displays are small, only about 1" diagonal, but very readable due to the high contrast of an OLED display. This display is composed of 128x32 individual white OLED pixels, each one being turned on or off by the controller chip. Since the display produces its own light, no backlighting is required. This reduces the power required to operate the OLED and that's why the screen is so contrasting; we really like this miniature screen for its sharpness!

The SSD1306 driver chip, communicates only via I2C. 3 pins are required to communicate with the chip on the OLED display, two of which are I2C clock/data pins.

The OLED and the pilot require a 3.3 V power supply and 3.3 V logic levels for communication. To make it easier for our customers to use, we have added a 3.3 V regulator and an on-board level adapter! This makes it compatible with any 5V microcontroller, such as the Arduino.

The power requirements depend somewhat on the amount of power on the display, but on average, the display consumes about 20 mA from the 3.3 V power supply. The OLED pilot integrates a simple charging pump that transforms 3.3v-5v into a high voltage drive for OLEDs.

Of course, we wouldn't leave you with a data sheet and "good luck": We have a detailed tutorial and sample code in the form of an Arduino library for text and graphics. You will need a microcontroller with more than 512 bytes of RAM because the screen must be buffered.

You can download our SSD1306 OLED display library Arduino from github which contains a sample code. The library can print text, bitmaps, pixels, rectangles, circles and lines. It uses 512 bytes of RAM since it needs to buffer all the display but it's very fast! The code is easy to adapt to any other microcontroller.

Documentation

Monochrome OLED Breakouts

Accessories

Avis clients