Customers who bought this product also bought:
- MCP9808 temperature sensor I2C precision
- Prototyping Hole Plates 4cm x 6cm
- Case Raspberry PI B+ PI2 PI3 Transparent Adafruit
- Audio amp class D Stereo 3, 7W - MAX98306
- Cable USB B female - A Male to mounting Panel
- Adafruit SGP30 Air Quality Sensor Breakout - VOC and eCO2
- 5V opto-isolated relay module 2 channel 10A
- Prototyping Hole Plates 2cm x 8cm
- Cable Micro USB Male/female for panel mounting
Is this not the cutest, little display for the Raspberry Pi? It features a 3.5" display with 480x320 16-bit color pixels and a resistive touch overlay just like our popular original, but this one is engineered specifically to work with the newer "2x20 connector" Raspberry Pi's. The plate uses the high speed SPI interface on the Pi and can use the mini display as a console, X window port, displaying images or video etc. Best of all it plugs right in on top!
This PiTFT 3.5" is designed to fit nicely onto the Raspberry Pi Zero, Pi 3, Pi 2 or Model A+ / B+ (any Pi with a 2x20 connector). Not for use with an old Pi 1 with 2x13 connector If you'd like to use a 3.5" display with the original Pi A or Pi B, check out this version
The display uses the hardware SPI pins (SCK, MOSI, MISO, CE0, CE1) as well as GPIO #25 and #24. GPIO #18 can be used to PWM dim the backlight if you like. All other GPIO are unused. There's a 2x13 'classic Pi' connection GPIO header on the bottom, you can connect a 26-pin Pi GPIO cable to it to use any of the other pins as you like. The other GPIO are broken out into solder pads at the bottom, in case you want to use more of the GPIO.
Best of all, it comes fully assembled and ready to plug into your Pi! You can use this as a display for running the X interface, or pygame. You can also have an HDMI display seperately connected. There's four mounting ears that can be used to attach the display & Pi to a bezel, or snap them off with pliers (they're perforated) for a slick exactly-the-same-size-as-a-Pi look.
We've created a custom kernel package based of off Notro's awesome framebuffer work, so you can install it over your existing Raspbian (or derivative) images in just a few commands. Our tutorial shows you how to install the software, as well as calibrate the touchscreen, display images such as from your PiCam and more!
Display current draw is mostly based on the backlight, with full-on backlight the current draw is ~100mA
A 2.2-inch insert on your Raspberry PI card TFT screen.29,94 € Add to cart
A capacitive touchscreen for Raspberry PI model + A / + B and FT2 connecting the GPIO port53,94 € Add to cart
A 2.4 inch TFT touchscreen to insert on your Raspberry PI card.41,94 € Add to cart
A batch of 2 balusters M2.5 16 mm and nuts to set floors on your Raspberry PI.1,68 € Add to cart
A small OLED screen that connects to the GPIO port of the Raspberry PI in I2C.17,94 € Add to cart