Block 2 X CR2032 battery with JST connector and ON-OFF inter
Customers who bought this product also bought:
- Battery Lithium Ion polymer - 3.7V 100mAh
- Kit of 40 female - female 150mm Premium dupont wires
- FeatherWing engine driver - add-on for Feather card
- Power Jack 2.1mm connector for breadboard and PCB
- Spool of thread thin 2 strands stainless - 23 m
- Cable USB type A - Micro B
- Kit FeatherWing matrix of LED 8 x 16 - white
- Adafruit Audio FX Sound Board - WAV/OGG Trigger with 16MB Flash
Sliding scale pricing
|Block 2 X CR2032 battery with JST connector and ON-OFF inter||10||2,11 €|
This small battery is ideal for feeding small fixtures or fixtures e-textiles. It allows to integrate easily 2 20mm button cells (2032 is the most common size) in series to generate a nominal voltage of 6V. (If you only want 3V, we recommend replacing a battery with a piece of copper). With two batteries CR203 for can get a voltage of 6V with 220mAh aware about.
This battery is made of plastic and can be used open or closed. You can keep it closed for safety with an adhesive tape. An on/off switch is integrated and it has a connector JST PH 2mm at the end of the cable.
This product does not include the CR2032 batteries that you can find on: CR2032 button
- Empty weight: 4.7 g, 10.5 g with two piles buttons CR2032
- Dimensions: 53mm x 23mm x 6mm
- Cable: 6 "(150mm) in length with a JST - PH 2 pin connector.