Module dual relay 5V - 250V 7A
Module dual relay 5V - 250V 7A
MR009-004.2
This Relay Module 2-Channel is compatible with Arduino, it uses two optocouplers to grant galvanic insulation, and it can drive a load up to 7A 250VAC per channel.
Customers who bought this product also bought:
- Power supply module 7-12V to 3,3V 1A and 5V 1A
- Sidekick Basic Kit V2
- Cable power Arduino for 9V batteries
- Knob potentiometer Soft Touch T18 - blue
- Adafruit Perma-Proto Full - sized Breadboard PCB - Single
- 5 X capacitor 470µF
- USB cable type A - B
- Kit of 50 Male - female 125mm wires
- Prototyping Hole Plates 2cm x 8cm
More info
Description
This Relay Module 2-Channel is a module designed to allow you to control two relays in a very simple and intuitive manner. Being compatible with Arduino, the most immediate way to use it is to connect it to an Arduino board using flexible jumpers.
Exploiting the characteristics of the relays mounted on the module and through the use of two Arduino digital I/O pins, it is possible to control motors, inductive loads and other devices; this product is therefore fundamental in domotics projects or, more in general, in robotics projects.
The module is equipped with two optocouplers on the IN1 and IN2 lines in such a way that it ensures the galvanic insulation between the relay load and the control board which drives this module. Two LEDs indicate the ON and OFF state of the two channels.
Features
| Supply voltage | +5V |
| Supply current | 144mA typ. (150mA max.) |
| Current on pin INx | 14mA typ. |
| Rated load | 7A 250VAC |
| Operating temperature | -30°C / +70°C |
| Operate time max. | 10ms Max. |
| Release time max. | 5ms Max. |
| Insulation resistance | 100Mohm Min. |
| Mechanical Life Expectancy | 10,000,000 operations |
| Electrical Life Expectancy | 10,000 operations |
| Dimensions | 1.7” x 1.3” (43.2 x 33.0 mm) |
| Weight | 0.92 oz (26.2g) |