Arduino Nano Clone
Arduino Nano Clone
SGK-NANO
data-lang="en">
The clone version of the famous Arduino Nano card
Customers who bought this product also bought:
- Connector Strip Arduino Pack
- Long 5 connectors male 1 X 16 extra 2.54 mm strip lot
- Module dual relay 5V - 250V 7A
- Copper Foil Tape with Conductive Adhesive - 6mm x 5 meters long
- Cable Gland PG-9 size - 0.158" to 0.252" Cable Diameter - PG-7
- No engine has no 12V NEMA17 200 step/rev 350mA
- HC-SR04 ultrasound distance sensor
- 10 x BC547 Transistors - NPN
- DC Gearbox Motor - "TT Motor" - 200RPM - 3 to 6VDC
More info
An unofficial version of the Arduino Nano card with the same features.
USB/Serial converter based on CH340.
Features and characteristics
Microcontroller: ATmega328
Rated operating voltage: 5V
Supply voltage: 7-12V
Digital inputs/outputs: 14 (6 of which can be used as PWM outputs)
Analog inputs: 6
DC Current per I/O Pin : 40 mA
DC Current for 3.3V Pin : 50 mA
Flash memory: 32 KB (ATmega328) including 0.5 KB used by the bootloader
SRAM: 2 KB (ATmega328)
EEPROM: 1 KB (ATmega328)
Clock frequency: 16 MHz
Data sheet
| Micro-contrôleur | ATmega328P |
| Micro-contôroleur - Horloge | 16 MHz |
| SRAM | 32 KB |
| Flash | 2 KB |
| EEPROM | 1 KB |
| Entrées/Sorties numériques | 14 |
| Tension logique (GPIO) | 5V |
| PWM | 6 |
| Entrées analogiques | 6 |
| Alimentation nominale | 7V à 12V |
| Connectique pour chargement | USB Type B |
Accessories
- 3,60 € Add to cart
Power supply 9V 830mA 2.1 mm Jack Arduino
The block area ideal to power your Arduino board via the DC Power Connector.
10,00 € Add to cart- 5,94 € Add to cart
