5V 1.5A Output PoE Module - Works with Raspberry Pi 3 B+
ADA 3847
One Raspberry PI 3 B+ compatible 5V 1.5A PoE module
Customers who bought this product also bought:
- Solar Panel Grand 6V 3, 4W
- Adafruit Perma-Proto Full - sized Breadboard PCB - Single
- PoE Splitter with MicroUSB Plug - Isolated 12W - 5V 2.4 Amp
- 10 X resistance 47kohms 0.25W
- 10 X resistors 0.25W 220 Ohm
- Conductive Nylon Fabric Tape - 5mm Wide x 10 meters long
- Accelerometer LIS3DH 3-axis (+ - 2g / 4g / 8g / 16g)
- Peristaltique pump 5V to 6V for liquid with silicone tubes
- MCP23017 - Circuit 16 bit I2C port extension
More info
Power over Ethernet (PoE) can make wiring your project child's play - instead of needing one cable for power and data, you can use a single Ethernet cable for both! All you need is this convenient PoE module and access to the central outlets on your Ethernet card. Connect the four input wires and get 5V 1.5A regulated on the other side. Unbelievable!
This module works well with the Raspberry Pi 3 model B+, which has all 4 wires on one connector. As you can see on our pictures, you only need a few female-to-female wires to route the Ethernet wires to the module, then two wires to bring the 5V back to the header. Note that even if a 2.5A power supply is recommended for a Pi 3B+, this is only necessary if you attach a bunch of accessories (like a 7" screen!) 1.5A will cover a wide range of uses, as the current consumed is about 0.7A max without extras.
We also have an insulated version of this module, when you want an electrical separation.
Technical details
To use :
Connect pins 1 and 2 to Ethernet wires 4 and 5.
Connect pins 3 and 4 to Ethernet wires 7 and 8.
The pin marked (-) is the ground output.
The pin labelled (+) is output 5V.
Product dimensions 56.4mm x 20.3mm x 13.2mm / 2.2" x 0.8" x 0.5" x 0.5".
Product Weight: 9.0g / 0.3oz
Accessories
- 3,30 € Add to cart
Passive PoE injection cables Pack
A lot of cable allowing an injection and extraction on the principle of the PoE Ethernet.
7,14 € Add to cartCable Gland - Waterproof RJ-45 / Ethernet connector
A cable gland with RJ45 connector for your wet projects.
9,54 € Add to cartPoE Splitter with MicroUSB Plug - Isolated 12W - 5V 2.4 Amp
A PoE splitter with Ethernet output and 5V 2.4A power supply.
13,14 € Add to cart