DC Gearbox Motor - "TT Motor" - 200RPM - 3 to 6VDC
ADA 3777
A "TT Motor" type geared motor for your robotics projects.
Customers who bought this product also bought:
- 74HC595 - registry to offset
- With filter IR and white LED - TCS34725 RGB color sensor
- wires for prototyping Kit
- HC-SR04 ultrasound distance sensor
- Plastic Micro Servo Adapter for LEGO Cross - 16mm long
- 5 X 5 mm infrared LED
- TMP36 temperature sensor
- Touch screen resistive TFT 2.8 "320 x 240 8bits or SPI
- Adafruit PiOLED - 128x32 Monochrome OLED for Raspberry PI
More info
You may have assembled a new robot friend, added a computer for a brain and other fun personality touches. Now it's time to let him leave the nest and fly with his own wings - uh, uh, with wheels!
These durable (but affordable!) plastic gear motors (also known as'TT') are an easy and inexpensive way to get your projects moving. It is a TT direct current gearbox motor with a 1:48 gear ratio, and comes with 2 x 200 mm wires with 0.1" male connectors suitable for breadboards. Perfect for connection to a breadboard or terminal blocks.
You can power these motors with 3VDC up to 6VDC, they will of course go a little faster at higher voltages. We took an engine and found these statistics by running it from a stabilized power supply.
At 3VDC, we measured 150mA at 120 RPM without load, and 1.1 Amperes in case of blocking.
At 4.5 VDC, we measured 155 mA at 185 rpm without load, and 1.2 A when the engine is off.
At 6VDC, we measured 160mA at 250 RPM without load, and 1.5 Amperes in case of blockage.
Note that these are very basic motors, without integrated encoders, speed control or position feedback. Tension in, rotation out! There will be variations from engine to engine, so a separate feedback system is needed if you need precision motion.
Delivered individually by order, with only the motor + wires. You cannot drive them directly from a microcontroller, a high current motor driver is required! We recommend the DRV8833 for these motors, as it works well up to 3V and can be configured with current limiting as stall current on these motors can be high.
We have a range of wheels, add-ons and accessories for these engines so you can use it as you wish.
Features
- Rated Voltage: 3~6V
- Continuous No-Load Current: 150mA +/- 10%
- Min. Operating Speed (3V): 90+/- 10% RPM
- Min. Operating Speed (6V): 200+/- 10% RPM
- Torque: 0.15Nm ~0.60Nm
- Stall Torque (6V): 0.8kg.cm
- Gear Ratio: 1:48
- Body Dimensions: 70 x 22 x 18mm
- Wires Length: 200mm & 28 AWG
- Weight: 30.6g
Accessories
- 3,60 € Add to cart
FeatherWing engine driver - add-on for Feather card
A map Add-on for Feather to piloetr DC moetrs or step by step...
23,94 € Add to cart- 2,34 € Add to cart
Continuous motor - not no - DRV8833 driver
A driver of motor to rotate 2 Motors continuous or a stepper motor .
5,94 € Add to cartMotor continuous current a DC - size 130
An engine to cournat continuous size 130 with a power supply between 4, 5V and 9V DC.
2,34 € Add to cart