Mini Geared Pager Motor with Return Spring
A Mini gearmotor with a slightly unusual return spring.
Estimation de livraison entre le 29/01/2020 et le 30/01/2020
La Poste - So Colissimo
A partir de: 4,80 €
Customers who bought this product also bought:
- Cable RJ45 M/F for panel mounting
- 5V Electromagnet - 10 Kg Holding Force - P30/22
- Adafruit RGB Matrix Featherwing Kit - For M0 and M4 Feathers
- 5V Electromagnet - 5 Kg Holding Force - P25/20
- Adafruit Servo Shield 12-bit PWM I2C 16
- 32 x 16 RGB LED matrix
- Flexible Protoboard - 20cm x 30cm
- Adafruit SGP30 Air Quality Sensor Breakout - VOC and eCO2
- Small Plastic Project Enclosure - Weatherproof with Clear Top
These are very unusual motors, but we thought they might be useful for projects that require a small downward gear motor. In the centre is a'pager motor' - a small thin DC motor that operates at about 3VDC. This engine is then slowed down inside the red plastic body of the engine. Finally, the exit axle is connected to a plastic triangle with an angled wire return spring. Two plastic stops are integrated outside the motor.
If you keep the plastic triangle attached to the motor, you can swing the motor by applying forward or backward tension. The switch is located approximately 60 degrees from the center (120 degrees total). If you cut the power, the self-centering spring will bring the triangle back to the center.
You can also remove the triangular piece and you get a normal rotary axis that you can use to rotate something small.
As we said, they are unusual engines, but they are also inexpensive and unique - you may find a good use for them!
At rated voltage: DC 3V / Speed: 245 RPM
No-load current: 45mA Stall current: 380mA
Rated voltage : 3.7 V / Speed : 300 rpm.
No-load current: 57mA Stall current: 500mA
Outer shaft: 3.5 x 3.5mm
Cords: approx. 330mm
Weight : 3g
A mini motor vibrator for haptic projects.1,99 € Add to cart
A driver of motor to rotate 2 Motors continuous or a stepper motor .5,94 € Add to cart
An engine to cournat continuous size 130 with a power supply between 4, 5V and 9V DC.2,34 € Add to cart
A "TT Motor" type geared motor for your robotics projects.3,54 € Add to cart
A card dedicated to robotics for Feather cards.43,13 € Add to cart
A Spindle engine used in CD/DVD players.2,34 € Add to cart