Customers who bought this product also bought:
- Pack of 10 connectors Grove Universal 4 pins 90 °
- Module clock RTC - DS1307
- 10 X diode 1N4007
- Shield LCD 16 x 2 I2C RGB for Arduino
- Shield LCD 16 x 2 I2C blue and white for Arduino
- Adafruit NeoPixel NeoMatrix 8 x 8-64 RGB LED Pixel matrix
- Adafruit Motor/Stepper/Servo Shield for Arduino - v2.3
- Circuit Playground
- Sensor distance ultrasound - Grove
More info
Presentation
The Arduino Due card is based on the Atmel AM3X8E ARM Cortex-M3 Microcontroller.
It's the first Arduino board which has a 32-bit microcontroller
She has:
- 54 entries/digital kinds (of which 12 can be used as PWM outputs)
- 12 analog inputs
- 4 UART (serial port hardware)
- 2 DAC (digital-to-analog conversion)
- 2 TWI
- 1 SPI
- JTAG connection
- a 84 MHz quartz oscillator
- a USB OTG connection
- a USB programming and debug
- a power outlet
- a reset button.
It contains everything needed to fly the microcontroller, simply connect it to a computer with a USB cable to use it simply.
Map Arduino DUE respects the standard arduino 1.0 pinout.
Attention: The Arduino DUE card works in 3, 3V. All pins are therefore accepts a maximum of 3, 3V, if inject you a higher voltage as the 5V, it can be destructive for the card.
Package
The Arduino Uno is available in two version, DIP and SMD.
The functionalities are identical is only the package of the micro-controller ATmega328 changing (see photos)
Features
Micro-controller: AT91SAM3X8E
Nominal supply voltage: 3, 3V
Power supply (recommended): 7 - 12V
Supply voltage (limits): 6 - 20V
Input/output digital: 54 (including 12 that can be used as outputs PWN)
Analog inputs: 12
Outputs analog (DAC): 2
DC Current per I/O Pin: 130 my
DC Current for 3.3V Pin: 800 my
DC Current for 5V Pin: 800 my
Flash memory: 512 KB
SRAM: 96 KB (2 Bank of 64 KB and 32 KB)
Clock frequency: 84 MHz
Official Arduino made in Italy
Documentation
DUE documentation: http://Arduino.org/products/Arduino-due
Data sheet
Micro-contrôleur | AT91SAM3X8E |
Micro-contôroleur - Horloge | 84 MHz |
SRAM | 96 KB |
Flash | 512 KB |
Entrées/Sorties numériques | 54 |
Tension logique (GPIO) | 3,3V |
PWM | 12 |
Entrées analogiques | 12 |
Sortie analogique DAC | 3 |
Alimentation nominale | 7V à 12V |
Alimentation limite | 6V à 16V |
Connectique pour chargement | micro USB |
Accessories
- 9,48 € Add to cart
Cable USB type A - Micro B
Cable USB type A / B microphone to connect an Arduino Leonardo and USB2Serial
4,00 € Add to cart