Door keys Mifare Classic transparent 13.56 MHz RFID NFC

Customers who bought this product also bought:
- Flora - Accelerometer 3 axes and magnetometer - LSM303
- Transmitter and receiver 433 MHz RF modules
- NeoPixel Stick with 8 LED RGB LED and driver integrated
- Raspberry Pi 3 - Model B+ - 1.4GHz Cortex-A53 with 1GB RAM
- Module clock RTC - DS1307
- NE555
- Cable JST Femelle 2 pins 100mm
- Arduino Ethernet Shield 2
- Female to Micro USB 2.1 mm Power Jack cable
More info
Descritption
This product is a key door transparent contained a tag RFID NFC Mifare classic 13.56 MHz, this product is often used to achieve an identifaction of staff, to unlock for access, or any of another necessiatnt a identification system a small RFID Tag. The tag contains an NXP S50 circuit and an antenna, it is powered by the reader/enregistereur tag as soon as it is placed within a reasonable distance.
This door keys can be read by most of the RFID/NFC 13.56 MHz readers, but be sure that it accepts MiFare products well.
The RFID chip has a 1 EEPROM memory KB it is possible to read and write up to 100000 times, there is also a VAT registration only of 4 bytes which is available in read only.
Features
- S50 chip specification:
- Permanently EEROM 1 KiloByte (8 KiloBit) memory
- Integrated with a 48-bit key encryption engine
- Identifying single 4 Byte (read-only)
- Frequency 13.56 MHz
Tag specification:
Size: 38.39 mm / 1.51 "x 38.39 mm / 1.51" x 5.04 mm / 0.2 "
- Weight: 8.68 g
- Detcetion distance: up to 5 cm
Accessories
- 29,80 € Add to cart









