Description

The PIR motion detector are used to detect the movements of humans and animals in a radius of 6 meters (they can detect also the zombies, but this is not guaranteed). This model has a detection threshold setting before 2-4 seconds as well as a sensitivity setting. A cable with 30 cm connector is provided to simplify wiring.

It works on a power supply between 5V and 16V DC, see even in 3V when welding just after the regulator. The output signal is 3, 3V to the up state. The range is about 7 m by 120 °.

Features

• Length: 24.03 mm / 0.94in
• Width: 32.34 mm / 1.27in
• Mounting hole spacing: 28mm
• The screw hole diameter: 2mm
• Height (with lens): 24.66 mm / 0.97in
• Weight: 5.87 g / 0.2 oz

Documentation

PIR Motion Sensor