Module Touch TinkerKit
Customers who bought this product also bought:
- LED 10mm TinkerKit yellow module
- Blue 10mm TinkerKit LED module
- TFT LCD screen, 1.77 SPI Arduino
- Driver 16 bit PWM I2C - PCA9685 Servo12
- Flexible membrane 3 X 4 keyboard
- Flexible wire 22AWG red 25 ft spool
- NeoPixel FeatherWing - 4 x 8 RGB LEDS for cards Feather
- Housing IP B + FT2 ft3 Black Raspberry
- Module PushButton TinkerKit
The Touch is a touch sensitive sensor that detected the contact of a person's skin.
This module has an analog output ranging from 0V to 5V corresponding to the button support.
5V is 0V and support of the button if it does not.
By connecting this module on the analog inputs of an Arduino kit, you can directly read values between 0 and 1023 corresponding to the State of the button.
Description of the module:
At the back of the module, a green LED that indicates that the module is correctly powered and a yellow LED is representative of the support of the button...
The module has a amplifier and controller to touch QT100A.
Caution when turning the power on, to sensor is auto-calibre automatically, so it is necessary to not touch the sensor during the phase of the module or ignition, it may malfunction. A simple loss of power will allow the re - initialize.
This modules can be plugged directly on the TinkerKit Sensor shield using a TinkerKit connection cable.
This module is a SENSOR having a connector of OUTPUT to be connected on a ENTRY of the TinkerKit Sensor Shield.
The Touch TinkerKit Module documentation: http://www.tinkerkit.com/touch/
How to use the TinkerKit modules:
You can find all the details on the use of the tinkerKit modules and the bookshop associated: