Arduino Leonardo - R3
Customers who bought this product also bought:
The Arduino Leonardo is based on the microcontroller ATMEGA32U4, it is an evolution of the Arduino UNO at low cost. Everything has been optimized to reduce costs.
It has 14 digital input/kinds (of which 6 can be used as PWM outputs), 12 analog inputs (with 6 shared on the digital inputs), a 16 MHz quartz oscillator, a USB (micro USB) connection, a power jack, an ICSP connector, and a reset button.
It contains everything needed to fly the microcontroller, simply connect it to a computer with a USB cable to use it simply.
USB management is realized with the ATMEGA32U4 to emulate easily a keyboard or a mouse and other USB as a MIDI link and other devices...
Version Rev3 (R3):
1.0 Pinout: 2 pine (SDA and SSL) are added next to the AREF pin and 2 pine (IOREF and a reserve) are added next to the RESET. These pins will be added on the next shields
The Arduino Leonardo is available in two versions: with or without connectors, it lacks the Headers connectors.
- Micro-controller: ATMEL ATMEGA32U4
- Nominal supply voltage: 5V
- Power supply (recommended): 7 - 12V
- Supply voltage (limits): 6 - 20V
- Input/output digital: 20 (including 7 that can be used as outputs PWN)
- Analog inputs: 12
- DC Current per I/O Pin: 40 my
- DC Current for 3.3V Pin: 50 my
- Flash memory: 32 KB and 4 KB used by bootloader
- SRAM: 2.5 KB
- EEPROM: 1 KB
- Clock speed: 16 MHz
- Official Arduino made in Italy
Documentation Arduino: http://Arduino.cc/
Arduino in French documentation: http://Arduino.cc/FR/main/homepage
Arduino Leonardo documentation: http://Arduino.cc/en/main/ArduinoBoardLeonardo
Download the Arduino software http://Arduino.cc/en/main/software
ATMEL ATmega32U4 documentation http://www.Atmel.com/devices/atmega32u4.aspx?tab=documents
Mouse and Keyboard for USB bookstores http://Arduino.cc/en/reference/MouseKeyboard
Guide to get started with the Arduino Leonardo card http://Arduino.cc/en/guide/ArduinoLeonardo
|Micro-contôroleur - Horloge||16 MHz|
|Tension logique (GPIO)||5V|
|Alimentation nominale||7V à 12V|
|Alimentation limite||4,5V à 20V|
|Connectique pour chargement||micro USB|
Housing plastic ABS for Arduino Duemilanove, UNO and MEGA 2560 and Ethernet shield9,48 € Add to cart
2 X connectors Strip for Arduino 8 points1,44 € Add to cart
Arduino shield pemettant playback of audio file.26,40 € Add to cart
Shield to control motors current continuous and step by step with an arduino.26,40 € Add to cart
Cable USB type A / B microphone to connect an Arduino Leonardo and USB2Serial4,00 € Add to cart