SN754410 - Compatible L293D

SN754410 - Compatible L293D

SN754410 - Compatible L293D

CI-SN754410

data-lang="en">
5 5

The SN754410 allows to control easily one engine with a Arduino.

Availability: 26 items in stock

Need larger quantities? Contact us.

3,60 € tax incl.

Add to cart

Estimation de livraison entre le 25/09/2019 et le 26/09/2019

La Poste - So Colissimo

La Poste - So Colissimo

A partir de: 4,80 €

Customers who bought this product also bought:

More info

The integrated circuit is a SN754410 Quad half H-bridge to control easily a motor Stepper with two coils.

It allows to control a current of 1 has under a voltage of 4.5V to 36V to power the engine coils step-by-step motors continuous relays, coils.

The inputs are compatible in TTL and CMOS low level level.

Example usage to control 2 Motors continuous:

Connection d'un SN754410 avec deux moteurs à courant continu

PineNameFunctionNotes
11.2 IN Activation engine 1By putting this pin to 0V (LOW or GND), this will cut the power to the motor and putting it to the 5V (HIGH), this will activate the motor power supply. 
21 A Engine 1 Forward 

A (HIGH) 5V on this pin will allow the engine to run in one direction.

The speed can be controlled using a PWM.

31Y Motor 1 Power This pin must be connected to one of the pins on the motor continuous. 
4 MassMass This pin must be connected to ground.
5 MassMass This pin must be connected to ground. 
2Y Motor 1 Power This pin must be connected to one of the pins on the motor continuous.  
 2AEngine 1 Reverse 

A (HIGH) 5V on this pin will allow the engine to run in reverse direction.The speed can be controlled using a PWM.

 VCC2Power Source engine This pin allows you to power your motor (max 36V) 
 3.4 INEngine 2 Enable By putting this pin to 0V (LOW or GND), this will cut the power to the motor and putting it to the 5V (HIGH), this will activate the motor power supply.  
10  3AMotor Forward 2 

A (HIGH) 5V on this pin will allow the engine to run in one direction.

The speed can be controlled using a PWM.

11  3YMotor 2 Power This pin must be connected to one of the pins on the motor continuous.  
12 MassMass This pin must be connected to ground. 
13  MassMass This pin must be connected to ground. 
14  4YMotor 2 Power This pin must be connected to one of the pins on the motor continuous.  
15 4A Engine 2 Reverse 

A (HIGH) 5V on this pin will allow the engine to run in reverse direction.

The speed can be controlled using a PWM. 

16  VCC1Logic Power Circuit power (+ 5V) 

Download

Accessories

Avis clients