Customers who bought this product also bought:
- Adafruit Feather 32u4 RFM95 LoRa Radio - 868 or 915 MHz
- With filter IR and white LED - TCS34725 RGB color sensor
- NeoPixel Stick with 8 LED RGB LED and driver integrated
- Light sensor high precision - TSL2591
- Adafruit Motor/Stepper/Servo Shield for Arduino - v2.3
- Arduino Leonardo with Headers
- 20 Male - female 150mm Premium dupont wires Kit
- 40 Male - Male 150mm Premium dupont wires Kit
- 32 x 16 RGB LED matrix
More info
Description
This breakout card for the DHT11 sensor provides a digital output proportional to the temperature and humidity measured by the sensor. The technology used to produce the DHT11 sensor guarantees high reliability, excellent long-term stability and very fast response time.
Each DHT11 is calibrated with precision in the laboratory. The calibration coefficient is stored in the internal memory of the WBS and this value is used by the sensor's internal signal detection process. The single-wire serial interface allows a quick and easy integration of this sensor into the digital system.
The physical interface of the sensor is realized by a 3-pin connector: +5V, GND and DATA. The first two pins are the power supply and ground and they are used to power the sensor, the third is the digital output signal of the sensor.
Its small physical size (1.05 "x0.7") and very light weight (only 0.1oz) make this card an ideal choice for small robots and room monitoring systems.
Features
- Power supply: 5V
- Power consumption: 0.5 mA nominal / 2.5 mA maximum
- Temperature measuring range: 0°C to 50°C ± 2°C
- Measuring range humidity: 20-90%RH ±5%RH
Use with Arduino
Example code Arduino : https://www.microbot.it/sketches/DHT11.zip
Datasheet : https://www.microbot.it/documents/mr003-005-2_datasheet.pdf
Data sheet
Etendue de mesure | 0°C à 50°C ± 2°C |
Accessories
- 1,44 € Add to cart